Much of the discussion around the rationale for 5G – and
especially the so-called “ultra-reliable” high QoS versions – centres on
minimising network latency. Edge-computing architectures like MEC also focus on this. The worthy goal of 1 millisecond roundtrip time is
often mentioned, usually in the context of applications like autonomous
vehicles with snappy responses, AR/VR headsets without nausea, the “tactile
Internet” and remote drone/robot control.
Usually, that is accompanied by some mention of 20 or 50 billion connected
devices by [date X], and perhaps trillions of dollars of IoT-enabled value.
In many ways, this is irrelevant at best, and duplicitous and misleading at worst.
IoT devices and applications will likely span 10 or more
orders of magnitude for latency, not just the two between 1-10ms and 10-100ms. Often,
the main value of IoT comes from changes over long periods, not realtime control or
telemetry.
Think about timescales a bit more deeply:
- Sensors on an elevator doors may send sporadic data, to predict slowly-worsening mechanical problems – so an engineer might be sent a month before the normal maintenance visit.
- A car might download new engine-management software once a week, and upload traffic observations and engine-performance data once a day (maybe waiting to do it over WiFi, in the owner’s garage, as it's not time-critical).
- A large oil storage tank, or a water well, might have a depth-gauge giving readings once an hour.
- A temperature sensor and thermostat in an elderly person’s home, to manage health and welfare, might track readings and respond with control messages every 10 minutes. Room temperatures change only slowly.
- A shared bicycle might report its position every minute – and unlock in under 10 seconds when the user buys access with their smartphone app
- A payment or security-access tag should check identity and open a door, or confirm a transaction, in a second or two.
- A networked video-surveillance system may need to send a facial image, and get a response in a tenth of a second, before they move out of camera-shot.
- A doctor’s endoscope or microsurgery tool might need to respond to controls (and send haptic feedback) 100 times a second – ie every 10ms
- A rapidly-moving drone may need to react in a millisecond to a control signal, or a locally-recognised risk.
- A sensitive industrial process-control system may need to be able to respond in 10s or 100s of microseconds to avoid damage to finely-calibrated machinery
- Image sensors and various network sync mechanisms may require response times measured in nanoseconds
I have not seen any analysis that tries to divide the
billions of devices, or trillions of dollars, into these very-different cohorts
of time-sensitivity. Given the assumptions underpinning a lot of 5G business
cases, I’d suggest that this type of work is crucial. Some of these use-cases
are slow enough that sending data by 2G is fine (or by mail, in some cases!). Others are so fast they’ll
need fibre – or compute capability located locally on-device, or even on-chip, rather than in
the cloud, even if it’s an “edge” node.
I suspect (this is a wild guess, I'll admit) that the proportion of IoT devices, for which there’s a
real difference between 1ms and 10ms and 100ms, will be less than 10%, and
possibly less than 1% of the total.
(Separately, the network access performance might be swamped by extra latency added by security functions, or edge-computing nodes being bypassed by VPN tunnels)
The proportion of accrued value may be similarly low. A lot of the IoT examples I hear about are either long time-series collections of sensor data (for asset performance-management and predictive maintenance), or have fairly loose timing constraints. A farm’s moisture sensors and irrigation pumps don’t need millisecond response times. Conversely, a chemical plant may need to alter measure and alter pressures or flows in microseconds.
(Separately, the network access performance might be swamped by extra latency added by security functions, or edge-computing nodes being bypassed by VPN tunnels)
The proportion of accrued value may be similarly low. A lot of the IoT examples I hear about are either long time-series collections of sensor data (for asset performance-management and predictive maintenance), or have fairly loose timing constraints. A farm’s moisture sensors and irrigation pumps don’t need millisecond response times. Conversely, a chemical plant may need to alter measure and alter pressures or flows in microseconds.
Are we focusing 5G too much on the occasional Goldilocks of
not-too-fast and not-too-slow?
